A UniFi access point is a small Wi-Fi device that connects to your network by Ethernet cable and sends a wireless signal to phones, laptops, TVs, printers and other devices. If you are searching for access points for a UniFi network, the main decisions are which model fits your space, where to mount it, and how to power and manage it.
This guide covers those decisions in plain English. Check current specifications on Ubiquiti's own store before you buy, because the model lineup changes.
What a UniFi access point does
Many people buy a single Wi-Fi router and expect it to cover the whole building. A router usually combines routing, a firewall, a switch and Wi-Fi in one box. That works for a small apartment. It often struggles in a larger home, an office, or a building with thick walls.
UniFi separates those jobs. A gateway handles routing and the firewall. A switch connects wired devices. Access points handle Wi-Fi only. You can then place access points where people actually use their devices instead of where the internet line happens to enter the building.
All of these devices are managed from one place, the UniFi Network application. From there you can see which devices are connected, adjust Wi-Fi settings, and apply updates. The application can run on a UniFi gateway or console, or on separate hardware, depending on your setup.
Choosing the right access point
There is no single best UniFi access point. The right one depends on the space and the devices on it. Start with these questions.
How many devices will connect at once? A household with a few phones and laptops has different needs from an office with dozens of devices, video calls and shared printers. More simultaneous devices generally call for a more capable access point, or more access points.
What kind of space is it? Open rooms are easier to cover than buildings with brick, concrete, metal studs or several floors. Ceiling-mounted access points suit most interiors. Some models are made for outdoor use or for mounting on a wall.
Which Wi-Fi generation do your devices support? Access points are sold by Wi-Fi generation, such as Wi-Fi 6 or Wi-Fi 7. Newer access points work with older devices, but you only get the newer features if your phones and laptops support them too. Buying the newest model for a house full of older devices may not change much.
What does the wired side look like? The fastest access point is held back by a slow cable or a switch that cannot keep up. Plan the cabling and switch ports along with the Wi-Fi. Our guide to selecting a UniFi switch covers that half of the decision.
For a longer walkthrough of model types, read our guide to choosing the perfect UniFi access point. The UniFi product line page is a useful starting list. It may be dated, so confirm current models and specifications with Ubiquiti before you order.
Power: PoE or a power adapter
Most UniFi access points are designed to run on Power over Ethernet, or PoE. PoE sends power and data over the same network cable, so you do not need an outlet near the ceiling or wall where the access point is mounted. The standards behind PoE are published by the IEEE as part of Ethernet (802.3af, 802.3at and 802.3bt).
There are two common ways to supply PoE:
- A PoE switch. The switch powers the access point directly. This is usually the neatest option when you have several access points.
- A PoE injector. A small adapter sits between a non-PoE switch and the access point. This works well for one or two devices.
Check the power requirement of the specific model you plan to buy. Different access points need different PoE levels, and a switch port that cannot supply enough power can cause problems. Ubiquiti lists this on each product page.
Where to place access points
Placement matters as much as the model. A few practical rules help.
- Mount high and central. Ceilings are usually better than floors or shelves. Furniture, people and appliances absorb signal.
- Avoid hiding it. Do not put an access point inside a cabinet, behind a TV, or next to large metal objects.
- Use more than one when needed. Several access points at moderate settings usually work better than one access point pushed to its limit.
- Think about each floor. In a multi-story building, signal passing through floors weakens quickly. Plan at least one access point per level, then adjust.
- Run the cable first. The best location is only useful if you can reach it with a network cable. Decide on locations before the walls are closed up or the ceiling is finished.
A site survey, even a simple walkthrough with a phone or laptop, shows where the weak spots are. The UniFi Network application also shows signal and connection details once the access points are running, which helps you adjust after the first week of real use.
Common problems with UniFi access points
Most trouble reports fall into a few groups.
An access point will not adopt. Adoption means the UniFi Network application takes control of a new device. It can fail if the access point and the application are on different network segments, if the device is already tied to another controller, or if the device needs a firmware update first.
Wi-Fi drops or is slow in certain rooms. The cause may be placement, interference from neighboring networks, channel settings, or too many devices on one access point. It may also be the wired link behind the access point. Check the cable and switch port before changing Wi-Fi settings.
The access point reboots or disconnects. Weak PoE power, a damaged cable or a bad connector are common reasons. Try a different cable or port to narrow it down.
Devices stay connected to a distant access point. Some devices hold on to a weak signal instead of moving to a closer one. Settings in the UniFi Network application can help, but results vary by device.
None of these have a one-size-fits-all fix. Look at the logs and the network layout before changing settings at random.
Keeping access points healthy
An access point is not a set-and-forget device. A few habits help:
- Review firmware updates and apply them on a schedule that suits you, ideally outside business hours.
- Back up your UniFi Network configuration before major changes.
- Use a strong Wi-Fi password and consider a separate guest network for visitors.
- Label cables and keep a simple record of where each access point is mounted.
- Recheck coverage after you add furniture, move walls, or add new devices.
UniFi Support, based in Sewell, New Jersey, offers UniFi support services that include installation assistance, firmware updates, troubleshooting and network optimization. Support is available by phone, chat and email, and remote support means you do not have to be in South Jersey to ask for help.
Next step
If you are choosing access points, planning placement, or trying to work out why your current UniFi Wi-Fi is unreliable, contact UniFi Support or call (856) 603-0000. Tell us the size of the space, the number of devices and what gear you already own. For pricing, ask for a quote.
FAQ
How many UniFi access points do I need?
It depends on the layout, building materials and number of devices. A small apartment may need one. A larger home or office often needs several, with at least one per floor. A walkthrough of the space and a look at your device count is the most reliable way to decide.
Do UniFi access points need a controller?
UniFi access points are managed through the UniFi Network application. Some people run it on a UniFi gateway or console, and others run it on separate hardware or in the cloud. Check Ubiquiti's documentation for the options supported by your hardware.
Can I mix UniFi access points with a non-UniFi router?
Often yes. An access point can usually connect to a network that is routed by other equipment. You may lose some of the single-dashboard convenience of an all-UniFi setup, and some features depend on the gateway. Confirm the details for your specific models.
Do I need PoE for a UniFi access point?
Most models are built to be powered over Ethernet, using either a PoE switch or a PoE injector. Check the product page for the exact power requirement before you buy a switch or injector.
Should I buy the newest access point available?
Not always. The newest model helps most when your devices support the same Wi-Fi generation and your wired network can keep up. Match the access point to your devices, space and cabling, and confirm current models on Ubiquiti's store before ordering.